6Al-4V titanium alloy bar according to ASTM B348
We have about 100 metric ton 6AL-4V titanium alloy bars in stock. Diameter is from 3mm to 100mm, length is about 4-6 meters. All our bars are made of good quality titanium ingots which are melted by using high quality titanium sponge.
We can cut them according to customer’s requirement and no minium order quantity. Usually, we will send out your orders within 48 hours after order confirm.
If your required sizes are not in our stock list, we also can do new production for you, usually it will take one to three weeks according to your order quantity.
******
Little Knowledge:
-Titanium material generally has 2 catagories, they are common titanium material and Special titanium material.
-Common titanium, such as titanium sheet, titanium bar, titanium tube and so on. There is also t catagories, they are Commercial pure titanium, and Titanium alloy.
1. Commercial pure titanium.(CP titanium)
2. Corrosion resistance. Adding effective miroelements to make corrosion resistant titanium alloy.
3. In order to improving strength and machinability, add alloying element to make it titanium alloy.
-Special Titanium has about 2 different from common titanium, the difference as below:
1. It is more pure than CP titanium.(Spattering target with film)
2. Functional titanium alloy.
The post 6Al-4V titanium alloy bar according to ASTM B348 appeared first on SIHON Titanium.
